按照https://www.rvmcu.com/community-topic-id-369.html说明安装驱动后，图示标注3处仍未显示jtag-debugger,同时Eclipse run 失败，感觉是不是还是由于没有显示jtag-debugger导致的呢？系统win10，开发板型号HUMMINGBIRD Evaluation Kit,调试器型号HUMMINGBIRD Debugger Kit。

Eclipse run 错误信息如下：

GNU MCU Eclipse 64-bits Open On-Chip Debugger 0.10.0+dev-00084-gae68d7da-dirty (2018-09-26-15:32)

Licensed under GNU GPL v2

For bug reports, read

 http://openocd.org/doc/doxygen/bugs.html

adapter speed: 1000 kHz

Info : auto-selecting first available session transport "jtag". To override use 'transport select '.

Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED

Info : clock speed 1000 kHz

Error: JTAG scan chain interrogation failed: all ones

Error: Check JTAG interface, timings, target power, etc.

Error: Trying to use configured scan chain anyway...

Error: riscv.cpu: IR capture error; saw 0x1f not 0x01

Warn : Bypassing JTAG setup events due to errors

Error: Unsupported DTM version: 15

Info : Listening on port 3333 for gdb connections

Error: Target not examined yet

Error: Unsupported DTM version: 15

Warn : Flash driver of my_first_flash does not support free_driver_priv()